Datasheet

SPECIFICATION SHEET
AP 7502
PAGE 3
The AP 7502 micro-cell access point — providing low-cost high-performance
Wi-Fi services in guest rooms, patient rooms, classrooms and more.
For more information, please visit www.motorolasolutions.com/wlan or access
our global contact directory at www.motorolasolutions.com/contact us
TECHNICAL SPECIFICATIONS
PHYSICAL CHARACTERISTICS
Dimensions 3.5 in. L x 3.7 in. W x 1.35 in. H
90 mm L x 95 mm W x 35 mm H
Extends into wall cavity .25 in./7mm
Weight 0.5 lbs./0.23 kg
LED Activity
Indicators
Two single color status LEDs
AVAILABLE INTERFACES
802.11 Wireless
Interface
Dual Radio; 802.11a/b/g/n/ac
2.4GHz and 5.2GHz
Bluetooth LE
Interface
Single BLE transceiver
LAN Ethernet ports: 3 x IEEE 802.3 10/100Mb auto-sensing
Uplink LAN
Ethernet
1 x IEEE 802.3 Gigabit Ethernet auto-sensing
RADIO SPECIFICATIONS
Wireless medium Direct Sequence Spread Spectrum (DSSS),
Orthogonal Frequency Division Multiplexing
(OFDM), Modulation and Coding Scheme,
(MCS), High Throughput (HT)
Network standards IEEE 802.11a/b/g/n/ac, 802.11d and 802.11i
WPA2 and WMM
Data rates
supported
802.11b: 1, 2, 5.5 and 11
802.11g/a: 6, 9, 12, 18, 24, 36, 48 and and 54 Mbps
802.11n: MCS 0-15 up to 300 Mbps
802.11ac: MCS 0-8 up to 867 Mbps
Operating
frequencies
2.4 GHz band: 2400 - 2483.5 MHz
5.2 GHz band: 5150 - 5250 MHz, 5725 - 5850 MHz
Antenna
configuration
2.4Ghz: Two internal omni-directional, 1x2, 2x2,
MIMO, 3dBi peak gain
5Ghz: Two internal omni-directional, 1x2, 2x2,
MIMO, 5dBi peak gain
Bluetooth: one internal omni-directional
Transmit power 6dBm to 15dBm per transmit chain
1dB increments (Actual transmit power
dependent on national limits.)
Receiver sensitivity 2.4GHz band: -96dBm @ 1Mbps; -74dBm @
MCS7 40mHz
5.2GHz band: -95dBm @ 6Mbps; -73dBm @
MCS7 40MHz
Bluetooth LE 2400 - 2483.5KHz in 2MHz channels, user
configurable UUID, beacon period, format
NETWORKING SPECIFICATIONS
BSS 8 BSSISDs; 16 SSIDs
Layer 2 and Layer 3 802.1Q, 802.1D, DHCP Server/client, BootP,
PPPoE, LLDP, GRE and IPSec
Security Stateful L2/L3 firewall, IP filtering, NAT,
802.1x, 802.11i, WPA2, Dedicated fulltime
WIPS sensor mode, secure guest access
captive portal
Management SSH, HTTPS, SNMPv3
Quality of
Service (QoS)
WMM, 802.1P, DSCP. Applied per radio,
WLAN and user
POWER
Access point 6.5w operating
PoE PD 802.3af, 802.3at
PoE PSE 802.3af when input is 802.3at; ~6.5w when
input is 802.3af; no output when input is DC
wall brick
ENVIRONMENTAL
32 ° F to 104° F/0 ° C to 40° C, 5% to 90% non-condensing
MOUNTING
Universal mounting bracket for worldwide structured cable boxes; includes
US 70 mm x 115 mm decor trimplate
REGULATORY
FCC 15.247, 15.407 / EN300 328, EN 301 893; UL EU EN 60950-1 2nd
Ed., ANZ RCM, UL 2043; FCC Part 15 Subpart B, EN 55022: 2010 + A1:
2007, ICES – 003 (Class B) EN 55024: 2010 + A1: 2001 + A2: 2003; EU
RoHS Directive 2011/65/EU (EN50581: 2012 Standard); CE, IC, FCC
ORDERING INFORMATION
AP-7502-67030-US
AP-7502-67030-WR
AP-7502-67030-EU
AP-7502-67030-APME
802.11ac/802.11n Dual Radio Wallplate AP;
Universal mounting bracket and US sized
decorative trim included
AP-7502E-67030-US
AP-7502E-67030-WR
AP-7502E-67030-EU
802.11ac/802.11n Dual Radio Wallplate AP; US-
sized decorative trim included