Specifications

AP 7131 Transmit Power
12.1 Configuring the AP 7131 Series Transmit Power
Professional installers must configure an AP 7131 series access point so it does not violate FCC regulations
pertaining to output transmit power.
This chapter describes how to adjust an AP 7131 series access point’s radio transmit power.
To define an AP 7131 series access point’s radio transmit power:
1. Complete the physical installation of the AP 7131 series access point following one of the supported
mounting options within either the AP 7131 Series Installation Guide or Product Reference Guide. Both
guides are available at http://support.symbol.com/support/product/manuals.do.
An AP 7131 series access point can attach to a wall, mount under a suspended T Bar or above a ceiling
(plenum or attic) following the same installation instructions. Choose a mounting option based on the
physical environment of the coverage area. Do not mount the access point in a location that has not been
approved in a site survey.
2. Start a browser and enter the access point’s default static IP address for the WAN port (10.1.1.1).
3. Initially log in using admin as the default Username and motorola as the default Password. Use your
new password if it has been updated from default.
If the default login is successful, the Change Admin Password window displays. Change the password
immediately to ensure secure access.
4. Select System Configuration > Quick Setup from the menu tree.
NOTE: Motorola assumes the AP 7131 series access point radio and power configuration
activities described in this chapter are conducted at the location that access point is
actually installed and deployed.