Spec Sheet

FRONT TO BACK
RATIO
> 10dB
POLARIZATION
LHCP
3DB BEAM WIDTH
80°
MAX POWER
10 watts
AXIAL RATIO
< 3 db
ENVIRONMENTAL
OPER. TEMPS
-22° F to +158° F, -30° C to 70° C
ENVIRONMENTAL
SEALING
IP 65 Vented
STORAGE
TEMPERATURE
-40° F to +158° F, -40° C to +70° C
VIBRATION
EN 61373, IEEE 1478, Mil-810G
HUMIDITY
Not Spec’d
COMPLIANCE
TAA COMPLIANT
YES
The antenna frequency specification and label is a characteristic trait of the antenna’s peak frequency response. The
RFID reader, when professionally installed and selected for a country of operation, dictates the actual frequency of
transmission/reception to ensure regulatory compliance for operation in a designated country. The actual frequency
specification of the antenna is not material to regulatory compliance.
The AN200 will perform reasonably well in EU frequency in most applications.
Repairs of Zebra RFID antennas for fixed readers may require the use of Zebra proprietary parts (and/or Zebra proprietary information). Zebra will sell these parts
(and provide this proprietary information) only to end-user customers for self-service. Applicable in the U.S. For all other countries, please contact your Zebra
account manager or the local Zebra Customer Service representative in your area for further detail
Part number SS-RFIDANTENNA-A Printed in USA 04/15.©2015 ZIH Corp. ZEBRA, the Zebra head graphic and Zebra Technologies logo are trademarks of ZIH
Corp, registered in many jurisdictions worldwide. All rights reserved. All other trademarks are the property of their respective owners.
ZEBRA TECHNOLOGIES