User Manual

• 2- 49 • RMAN-Cameo rev. C

Installing the Battery Latch

To install the Battery Latch:

1. Install the Battery Latch Button

Place the Battery Latch Button through the bottom of the Lower Housing. Place the

Latch Slider in the Lower Housing as shown, lining up the mounting hole with the

Latch Button. Assemble the Screw and Flat Washer together, and screw the Button

and Slider together loosely.

2. Install the Springs

Slide (2) Springs into the lower housing, capturing them between the Slider and the

Lower Housing. Tighten the Screw into the Latch Button. Insure the latch assembly

slides freely in the lower housing.

3. Install the Printer Assembly.

Refer to “Printer Assembly - Cameo 2 & 2

.”

4. Install the CPU Board.

Refer to “CPU Board - Cameo 3.”

5. Install the Top Cover.

Refer to “Top Cover - Cameo 2 & 3.”

6. Install the media and battery.

Refer to the

Cameo User’s Manual

You must use an ESD strap and work at a properly grounded

workstation (antistatic mat or tray). All electronic components must

be placed on an ESD protective tray. If stored, any electronic

components must be placed in antistatic bags.

Lower Housing

Screw 4-40 Socket Head Cap

Start Screw into Latch Button

before installing Springs.

#4 Flat Washer

Battery Latch Slider

Compression Spring

Battery Latch Button