User Manual

• 2- 47 • RMAN-Cameo rev. C

BELT CLIP & SHOULDER STRAP, CAMEO 2, 3, & 3

- AN16794-001

Removing a Shoulder Strap and Belt Clip

To remove a shoulder strap, slide the Shoulder Strap Clip off from the Belt Clip.

To remove a belt clip, remove the 2 screws and remove the belt clip from the

printer.

Attaching a Belt Clip

PCC digit 11 = 0 or 1:

Insert the ball joint of the Belt Clip through the cutout in the Belt Clip Retainer

and into the Belt Clip Retainer. Secure the Belt Clip Retainer to the Cameo

lower chassis with (2) M3 x 10mm Self-Tapping Screws. Make sure that the

Belt Clip rotates freely.

Attaching a Shoulder Strap

PCC digit 11 = 1:

After installing the Belt Clip as described above, slide the Shoulder Strap Clip

onto the Belt Clip and attach the Shoulder Strap to the Shoulder Strap Clip.

Belt Clip Retainer

Self-Tapping Screw

M3 x 10mm (2)

Belt Clip

Shoulder Strap Clip

Cameo 2

Belt Clip

M3 x 10 mm Self

Tapping Screw

Belt Clip Retainer

Shoulder Strap Clip

Cameo 3