User Manual

RMAN-Cameo rev. C • 2- 46 •
SMART CARD COVER, CAMEO 3 - AN16794-024
If your printer does not have a Smart Card Reader (PCC digit 11 = 0 or 1), the
Smart Card Reader cutout in the Top Cover must be filled with a Smart Card
Cover.
Removing a Smart Card Cover
To remove the Smart Card Cover, remove the Top Cover and then pry the
Smart Card Cover tabs and remove the Smart Card Cover from the Top Cover.
Do not lose the Smart Card Cover.
Installing a Smart Card Cover
To install a Smart Card Cover, plug it into the vacant Smart Card cutout in the
Top Cover.
You must use an ESD strap and work at a properly grounded
workstation (antistatic mat or tray). All electronic components must
be placed on an ESD protective tray. If stored, any electronic
components must be placed in antistatic bags.
Upper Case
Smart Card Cover
LABEL READS
THIS WAY