User Manual

• 2- 45 • RMAN-Cameo rev. C
Magnetic Card Reader
Screw, Self Tap M3 x 10mm
Read head must be here
Note postion of Bracket, Mag
Card
the Chassis.
2. Secure the MCR with (2) M3 x 10mm Screws.
Note: Screws will bottom out into inserts, thus allowing card reader to float
freely.
3. Dress the MCR Cable so that it is not pinched or strained.
4. Secure the CPU Board by installing the 4 M3 x 10 mm Self-Tapping Screws. Refer
to “CPU Board - Cameo 3.”
5. Install the Top Cover. Refer to “Top Cover - Cameo 2 & 3.”
6. Install the Media and Battery. Refer to the Cameo User’s Manual .