User Manual

RMAN-Cameo rev. C • 1-2 •

SPECIFICATIONS

Physical

Cameo 2 Cameo 2

Cameo 3/ 3

/ 3N

Height 6.6" (168 mm) 7.3” (185 mm) 6.2” (158 mm) (3)

8.2” (208 mm)(3

,N)

Width 3.7" (94 mm) 3.7" (94 mm) 4.6” (117 mm)

Depth 2.6" (66 mm) 2.6" (66 mm) 2.6” (66 mm)(3, 3

)

3.5” (89 mm) (3N)

Weight* 1.15 lbs. (.5 kg) 1.35 lbs (.6 Kg) 1.4 lbs. (.64 kg) (3)

1.6 lbs (.73 kg) (3

)

1.9 lbs. (.86 kg.) (3N)

* Weight is with battery, no media loaded

Environmental

Operating temperature: 5° to 122°F (-15° to 50°C)

Storage temperature: -13° to 158°F (-25° to 70°C)

Relative humidity: 10%-90% non-condensing

Cameos automatically compensate for head temperature when printing. Protection circuitry prevents

damage due to excessive print head temperatures.

Printing Characteristics

Cameo 2, 2

Cameo 3/3N

Print Head Width: 1.9" (48 mm) 2.83” (72 mm)

Number of Dots: 384 574

Print Head Life 1,950,000"

(estimated) (50 Km nominal)

Technology Direct Thermal

Print Speed up to 3 IPS (76.2 mm/sec.)

Print Head Density 203 DPI (8 dots/mm)

Power

Cameos utilize removable NiMH battery packs. If not connected to a terminal

with DTR present, the Cameo will automatically power off to conserve battery life.

The time-out value can be programmed from the host terminal; the factory default

time-out is two minutes.

Additional power features include:

• Full charge will print approximately 3000” (76 m) of receipt stock.

• Low battery indicated by flashing LED and reported to terminal on

demand

• Power On/Off controlled from terminal or keypad