User Manual

• 2- 41 • RMAN-Cameo rev. C
8. Secure both the Radio Retainer and the Adapter to the Base with (3) Screws shown
at “A”. Adjust the Retainer against the radio module to prevent the module from
moving. Insure that the Antenna Cable has not been pinched before tightening the
Retainer screws.
9. Attach the Network Radio Cover to the Lower Cover Assembly with (4) Screws
shown at “B”.Insure that the Antenna lead is not pinched between the Adapter
Board and the Radio Cover before tightening screws.
Scew, Self-tapping
M3 x 8mm
Cover, Network Radio
Scew, Self-tapping M3 x 8mm
Radio Retainer. Adjust Retainer against
Radio Module before tightening screw.
Avoid pinching antenna cable.