User Manual

RMAN-Cameo rev. C • 2- 40 •
Prepare the Radio Adapter PC Assembly
2. Remove backing from adhesive side of Insulator and apply to Radio Adapter.
3. Insert the RF Module into the RF Adapter Board. Press the module all the way into
the connector on the Adapter Board.
4. Plug the Cable Assembly into J2 on the bottom of the Radio Adapter Assembly.
The connector is polarized and can only be inserted one way. Do not try to force it.
Install the Antenna
5. Install the RF Antenna in the Lower Cover, leading the antenna lead through the
cutout in the bottom cover.
6. Plug the Antenna into the Radio Module. Dress the IR Cable through the cutout on
the Lower Cover.
7. Locate the Radio Adapter PC Assembly onto the Network Radio Base.
Insulator
Infra-Red Cable or Network Radio Cable
Plug into J2 on bottom of board.
Observe connector polarity.
PCMCIA Radio
Radio Adapter
2.4 GHz Antenna Assembly
Insert Antenna connector into
RF Module where shown.