User Manual

RMAN-Cameo rev. C • 2- 38 •
RADIO MODULE ASSEMBLY, CAMEO 3N- AN16794-026, -027, -028, &-029
You must use an ESD strap and work at a properly grounded
workstation (antistatic mat or tray). All electronic components must
be placed on an ESD protective tray. If stored, any electronic
components must be placed in antistatic bags.
Equipment:
Phillips #1 screwdriver.
Removing the Long Range Radio
1. Remove the Network Radio Cover (4 Screws shown at “B”).
2. Remove the Radio Retainer and Adapter (3 Screws shown at “A”).
3. Locate the Radio Adapter PC Assembly onto the Network Radio Base.
4. Unplug the Antenna from the Radio Module, pull the antenna wire through the cutout
on the Lower Cover, and remove the Antenna from the Lower Cover.
Scew, Self-tapping M3 x 8mm
Cover, Network Radio
Scew, Self-tapping M3 x 8mm
2.4 GHz Antenna
Unplug Antenna