User Manual

RMAN-Cameo rev. C • 2- 28 •
2. Plug the Print Head Cable, Motor cable, Eye Sensor Cable, Ground Cable, and
Head-Open Cable into the CPU Board. Snap the CPU board in place and secure it
using the 2 Phillipps screws. Refer to “CPU Board - Cameo 3.”
3. Install the Top Cover. Refer to “Top Cover - Cameo 2 & 3.”
4. Install the media and battery. Refer to the Cameo User’s Manual .
Self Tapping Screw (2 places)
Print Mechanism
Be sure that nubs are
inserted in the slots before
securing with screws.
Head Open Switch
Wire Routing