User Manual

RMAN-Cameo rev. C • 2- 26 •
3. Plug the Print Head Cable, Motor cable, Eye Sensor Cable, Ground Cable, and
Head-Open Cable into the CPU Board. Secure the CPU board using the 4 Phillipps
screws. Refer to “CPU Board - Cameo 2.”
4. Install the Top Cover. Refer to “Top Cover - Cameo 2 & 3.”
5. Install the media and battery. Refer to the Cameo User’s Manual .
Self Tapping Screw (3 places)
Print Mechanism
Be sure that nub is
inserted in the slot before
securing with screws.
Head Open Switch
Wire Routing Detail