User Manual

RMAN-Cameo rev. C • 2- 22 •
SRRF ANTENNA ASSEMBLY, CAMEO 3- AN16794-012, 028, 030 & -032 (2.4 GHZ);
AN16794-013, -033 & -031 (916 MHZ)
The antenna is used in the following applications:
• 916 MHz SRRF (PCC Digit 7 = 3)
• 2.4 GHz SRRF Installation (PCC digit 7 = 4)
• Bluetooth (PCC digit 7 = B)
Insert the Antenna in the bottom edge of the Chassis, making sure that the
antenna lead is properly routed so that it is not crimped when any other
component is installed.
You must use an ESD strap and work at a properly grounded
workstation (antistatic mat or tray). All electronic components must
be placed on an ESD protective tray. If stored, any electronic
components must be placed in antistatic bags.
Be careful not to damage the actuator on the head open switch
while working on the Cameo Chassis.
Cameo 3 Chassis with
Magnetic Card Reader
and/or Smart Card Reader
Antenna
Cameo 3 Chassis - Basic
Antenna