User Manual

• 2- 17 • RMAN-Cameo rev. C
2. Connect the Cables to the CPU Board
Warning: The Tear Bar on the Printer Assembly has sharp edges. Use
caution when performing operations near the printer.
Plug all cables into the CPU board per the following Table:
From # of pins to CPU Connector #
Head-Open Switch 2 J1
MCR (PCC digit 12 = 1 or 3) 8 J2
Printer Motor 4 J11
Printer Eye Sensor 3 J5
Printhead Ground Flex circuit J6
Printhead 28 Circuits Flex J7
Power (Battery) 2 J8
Battery Sense 2 J9
802.11b radio (Cameo 3N only) 11 J10
Printer Motor 4 J11
SmartCard Reader 7 J12
SRRF (PCC digit 7 = 2, 8 or B) 8 SRRF1
Printhead Ground Strap to J6
Printhead Cable to J7
J5
J11
J6
J7
J1
Battery Sense to J9
Power Cable to J8
Eye Sense Cable to J5
Motor Cable to J11
Head Open Switch to J1