User Manual

• 2- 5 • RMAN-Cameo rev. C
No print (Continued):
• Network printers: refer to the RF LAN Information section of the Self Test printout to
verify the printer’s SSID and IP addresses are correct, and that the printer is
“associated” with the wireless LAN.
• Invalid label format or command structure — use Hex Dump Mode for
troubleshooting. Refer to the Programming Manual for more information.
Reduced battery charge life:
• Recondition (cycle) battery.
• Damaged battery-replace.
• Check battery date code: if one to two years old, short charge life may be due to
normal aging.
Status light flashing and beeper chimes:
• No application: reload program.
Status light flashing
• If using SRRF communications: normal indication while data is being received.
Status light always on:
• Check media is loaded and media compartment cover is closed and latched
Communication Error:
• Check media is loaded, media compartment cover is closed and latched, and error
light is off.
• Check baud rate.
• Replace cable to terminal.