User Manual

RMAN-Cameo rev. C • 2- 2 •
CLEANING
Never use any sharp objects on printer mechanism as it could
damage the print head and platen. Use only the supplied cleaning
pen or a cotton swab saturated with alcohol for cleaning. Always
turn the printer off prior to any cleaning operation.
Caution: Use care when handling the Printer Assembly to avoid being cut on
the serrated edge of the Tear Bar.
Cameo printers will provide years of reliable service provided a few simple
guidelines are followed. The printer should be cleaned approximately every
two weeks or more often, depending on usage and the type of media being
employed. Components of the printer that require periodic maintenance are
the print head, print roller (platen), and the media sensor. When cleaning,
please use only isopropyl alcohol, the same type included in the Cleaning Kit.
Always use Zebra label or ticket stock for maximum print quality and extended
printer life.
Cleaning the print head
• Always turn the printer off prior to any cleaning operation.
• Open the printer by squeezing the finger grips on either side of the media
compartment cover.
• Swing the media compartment cover open.
• Use the cleaning pen supplied with the printer and/or alcohol and cotton swabs to
clean the surface of the print head, the platen, and the sensor.
Print Head
Eye Sensor
Platen