User Manual

RMAN-Cameo rev. C • 1-6 •
Self Test
Cameos can perform a self test which will print a line of interlocking “x” characters
to insure all elements of the print head are working, and then print out the version of
software loaded in the printer. Refer to the Troubleshooting section for details on
interpreting the self-test.
To run the self test:
1. Press the "FEED" key.
2. While still holding down the "FEED" key, turn the printer ON by pressing and
releasing the "ON" key.
3. Keep the "FEED" key depressed until self test starts. The Cameo will perform
the self test and remain on.
CONTROL PANEL
Keypad Functions
On Switch:
momentary
action
turns on unit
IR Window;
must be aligned with
corresponding window on
host for IR
communications to occur.
(Units with IR option only)
Feed Switch:
Advances media
when held down.
Status Light:
Steady light
indicates printer is
either out of
media, or media
cover is open.
Flashing during data
transmission between
host and printer
indicates normal
wireless operation.
Power Light:
Indicates unit is
turned on
Flashing light
indicates low
battery