Datasheet

P1024810-101 • EN-5
Caution: It is very important to ensure you make the correct connections
to the power source, because electrical energy from a vehicle’s power
system can harm equipment and people.
Caution: If you need to jump start your vehicle from another vehicle
battery, disconnect the power cable running to the RW 420 Route Solution.
Failure to do so can result in damage to your mobile printer and/or the RW
420 Route Solution itself.
The safety instructions in this guide do not detail every situa-
tion which could be dangerous. Common sense, caution and care
should be exercised by the user or the person in charge of the
maintenance service.
The voltage of the accessory power supply used in conjunction with
the RW 420 Route Solutions to charge batteries is high enough to be
dangerous. Maintenance and repair of electric and electronic parts must
be carried out only by qualified technicians after considering all the
necessary safety measures.
The standard RW 420 Route Solutions system is not designed to operate in
environments with a potentially explosive atmosphere.
NOTE: Zebra Technologies is not liable for personal injury or damage to
any equipment caused by the improper installation of this equipment to any
power source.
Carefully read the electric data stated on the identification
nameplate placed on the device. In case such plate is missing or
unreadable, contact a Zebra authorized service provider.
The purpose of this guide is to explain how to use and install the
RW 420 Route Solutions accessory kits by means of instructions,
pictures and examples.
All the necessary operations are described in order to allow the
correct installation and use of the RW 420 Route Solutions acces-
sory kits.
NOTE: Always consult the user documentation supplied for the printer,
terminal and the RW 420 Route Solutions for more complete information on
the operation of these components.
Caution: Non-qualified personnel should not handle or attempt repairs of
any components of the RW 420 Route Solutions system.