Specifications

Label Top
The ^LT (Label Top) instruction moves the entire label format a
maximum of 64 dot rows up or down from its current position with
respect to the top edge of the label. A negative value moves the for-
mat towards the top of the label; a positive number moves the format
away from the top of the label.
This instruction can be used to fine-tune the position of the finished
label without having to change any of the existing parameters.
NOTE: This instruction does not change the Media Rest position.
The format for the ^LT instruction is:
^LTx
where
^LT = Label Top
x = -64 to +64 Dot Rows.
(Positive values do not require a “+” sign to be entered
and the “+” sign should not be used.)
(Instruction ignored if parameter missing or incorrect.)
Effective for Version 21.6.1
-120 to +120 Dot Rows
(Positive values do not require a “+” sign to be entered
and the “+” sign should not be used.)
{I.V.P. = Last permanent value saved}
284 ZPL II COMMAND REFERENCE
^L T