Specifications

Label Shift
The ^LS (Label Shift) instruction allows for compatibility with Z-130
Printer formats that are set for less than full label width. It is used to
shift all field positions to the left so that the same instructions used on
a Z-130 or Z-220 Printer can be used on other Zebra printers.
To determine the value for the ^LS instruction use the following for-
mula. Z-130/Z-220 values for ^LHx + ^FOx - (distance from edge
of label) = printer value for ^LSa. If the print position is less than 0,
then set ^LS to 0.
To be compatible with existing Zebra printers, this instruction must
come before the first ^FS instruction. Once you have issued an ^LS
command, the setting is retained until you turn off the printer or send
a new ^LS instruction to the printer.
282 ZPL II COMMAND REFERENCE
^L S