Specifications

String 2
<STX>mmm,n,o,p,q,r,s,t,uuuuuuuu,v,www<ETX><CR><LF>
mmm = Function Settings(*)
n = 0 (Unused)
o = “Head Up” Flag (1 = Head in UP Position)
p = “Ribbon Out” Flag (1= Ribbon Out)
q = “Thermal Transfer Mode” Flag (1 = Thermal
Transfer Mode Selected)
r = Print Mode
0 = Rewind
1=Peel Off
2=Tear Off
3=Reserved
s = Print Width Mode
6= 4.41"
t = “Label Waiting” Flag
(1=Label Waiting in Peel-Off Mode)
uuuuuuuu = Labels remaining in Batch
v = “Format While Printing” Flag (Always 1)
www = Number of Graphic Images stored in Memory
(*) This parameter specifies the Printer’s media type, sensor profile
status, and communication diagnostics status. As in String 1, this is a
3-digit decimal representation of an eight-bit binary number. First,
convert the decimal number to a binary number. Then, the 8-digit
binary number is read as follows:
mmm = m7 m6 m5 m4 m3 m2 m1 m0
m7 = Media Type
0 = Die-Cut
1 = Continuous
m6= Sensor Profile
0 = Off
242 ZPL II COMMAND REFERENCE