Specifications

The format for the ~DT instruction is:
~DTf,s,DATA
where
~DT = Download TrueType Font
f = Font Name
Default value:
NO NAME = The command is ignored
Other values:
Enter a Destination Indicator followed by the
TrueType Name (up to 8 characters maximum)
Destination Indicators:
R: = RAM Memory
B: = Memory Card
s = Font Size
Default value:
NO VALUE = The command is ignored
Other values:
Enter the number of bytes of memory
required to hold the Zebra Downloadable
Format of the Font
DATA = Data String
Default value:
NO VALUE = The command is ignored
Other values:
A string of ASCII Hex values
(2 hex digits/byte)
The total number of 2-digit values must match
the “Font Size” value. (An insufficient number of
bytes causes the entire command to be ignored.)
Example:
~DTR:FONT,52010,00AF01B0C65E.......
(52010 2-digit hex values)
ZPL II COMMAND REFERENCE 209
C
O
M
M
A
N
D
R
E
F
E
R
E
N
C
E