Datasheet

57
61335M Main Logic Board Maintenance Kit
Reinstall the Outer Enclosure and Trim
5/8/08 HC100 Maintenance Manual 61311L-001 Rev. A
7. Ensure that all wires are clear of all tabs and then press down until all tabs are engaged.
Reinstall the Outer Enclosure and Trim
1. Is there a wireless board installed?
2. See Figure 32. Turn the upper print mechanism cover on its side as shown with the ground
wire to the rear of the mounting post and the user interface cable to the rear of the upper
print mechanism release button.
Figure 32 • Reinstall the Outer Enclosure and Trim
If… Then…
No Continue with step 2.
Yes
a. See Figure 24 on page 48. Reinstall the antenna cable into the antenna
mounting bracket.
b. Reinstall the antenna.
c. Continue with step 2.
1
Outer enclosure
4
User interface cable
2
Upper print mechanism cover
5
Mounting post
3
Upper print mechanism release buttons (2)
6
Ground wire
1
2
3
4
6
5
5
6