Datasheet

61335M Main Logic Board Maintenance Kit
Remove the Media Cartridge
42
61311L-001 Rev. A HC100 Maintenance Manual 5/8/08
2. Did the cartridge eject?
3. Did the cartridge eject this time?
4. Contact Technical Support. See Contacts on page 9.
If… Then…
Yes a. Remove the media cartridge and set aside.
b. Go to Open the Printer on page 43.
No
a. Turn off (O) the power switch.
b. Turn on (l) the power and wait for the printer to power up completely.
c. Press Eject.
d. Continue with step 3.
If… Then…
Yes a. Remove the media cartridge and set aside.
b. Go to Open the Printer on page 43.
No
a. Turn off (O) the power switch.
b. Turn on (l) the power and wait for the printer to power up completely.
c. Press and hold Eject for six seconds.
d. Release Eject.
e. If the cartridge ejected, go to Open the Printer.
f. If the cartridge did not eject, continue with step 4.