Datasheet

Page 4-16 S400/S600 Maintenance Manual 44895L Rev. 3 3/15/04
6HFWLRQ 3UHYHQWLYHDQG&RUUHFWLYH0DLQWHQDQFH
3DXVHDQG&DQFHO.H\6HOI7HVW
Refer to Figure 4-11. This self test can be used to verify proper printer operation after
parts have been replaced or adjusted. When activated, the printer prints a maximum of
500 head test labels. Each label backfeeds prior to printing and feeds forward to the rest
position after printing. A serialized number prints on each label.
To start the Pause and Cancel Key Self Test, press and hold PAUSE and CANCEL while
turning the power on.
Press PAUSE or turn the power off to stop printing.
)HHGDQG&DQFHO.H\6HOI7HVW
This self test is normally performed during the manufacturing process or after a major
overhaul of the mechanical assemblies. This test prints seven preprogrammed formats at
6 ips and 2 ips. The printer automatically pauses after each format.
Table 4-3 shows the
sequence of formats. Refer to Figures 4-12 through 4-18 for sample label formats.
Note • The data cable must be removed from the printer (except for the Mode key test)
prior to running the self tests.