Datasheet

44895L Rev. 3 3/15/04 S400/S600 Maintenance Manual Page 3-7
7URXEOHVKRRWLQJ 6HFWLRQ
Poor print quality.
Darkness too low. Increase print darkness.
Incorrect media and
ribbon combination.
Replace media or ribbon.
Printhead adjustments
incorrect.
Perform required adjustments.
Misregistration/skips
labels.
Misadjusted media
sensors.
Perform media sensor adjustments. Also
try recalibrating.
Improper ZPL format. Correct ZPL format.
Printing across web or in
wrong position.
Loss of registration,
indicating media sensor
problem.
Adjust media sensor position.
Adjust media sensor sensitivity.
Printer set for continuous
media, but non-
continuous media loaded.
Set printer for correct type of media.
Peel-Off Mode:
Improperly adjusted
media edge guides or
power roller.
Reposition and adjust as necessary.
Long tracks of missing
print on several labels.
Wrinkled ribbon.
See “Troubleshooting Chart
(Wrinkled Ribbon)” on page 3-8.
Print element damaged. Replace printhead.
Table 3-3. Troubleshooting Chart (Problems with LED Indications) (Cont.)
Symptom Diagnosis Action