Datasheet

44895L Rev. 3 3/12/04 S400/S600 Maintenance Manual Page 2-17
2SHUDWLRQV2YHUYLHZ 6HFWLRQ
3DXVH.H\6HOI7HVW
Refer to Figure 2-12.
This self test can be used to provide the test labels for making adjustments to the printer’s
mechanical assemblies and Configuration Mode adjustments.
To start the Pause Key Self Test, press and hold PAUSE while turning the power On (l).
This self test consists of four individual test features:
• The initial self test prints 15 labels at 2 in. (50.8 mm) per second (ips) (speed A),
then automatically pauses the printer. Each time PAUSE is pressed, an additional
15 labels print, up to a maximum of 9999 labels.
• While the printer is paused, pressing CANCEL once alters the self test. Now each
time PAUSE is pressed, 15 labels print at 6 ips (152.4 mm) (speed D), up to a
maximum of 9999 labels.
• While the printer is paused, pressing CANCEL a second time alters the self test
again. Now each time PAUSE is pressed, 50 labels print at 2 ips (50.8 mm), up to
a maximum of 9999 labels.
• While the printer is paused, pressing CANCEL a third time alters the self test
again. Now each time PAUSE is pressed, 50 labels print at 6 ips (152.4 mm), up to
a maximum of 9999 labels.
Figure 2-12. Pause Key Self Test Printout