Datasheet
Page 1-4 S400/S600 Maintenance Manual 44895L Rev. 3 3/12/04
6HFWLRQ 'HVFULSWLRQRI(TXLSPHQW
0HGLD&RQVLGHUDWLRQV
0HGLD+DQGOLQJ
* These options are not found on all printers.
Table 1-2. Media Specifications
S400 S600
Minimum media width 0.75" (19 mm)
Maximum media width 4.5" (114 mm)
Maximum media width (cutter installed) 4.0" (102 mm)
Minimum media length (Tear-Off) 0.63" (16 mm)
Minimum media length (Peel-Off) 1.0" (25 mm)
Minimum media length (Cutter) 1.5" (38 mm)
Maximum media length 36" (914 mm) 39" (990 mm)
Total thickness (includes liner) 0.0023" to 0.012" (0.058 mm to 0.305 mm)
Core size 3.0" (76 mm)
Maximum roll diameter 8" (203 mm)
Minimum Inter-label gap 0.08" (2 mm) 0.118" (3 mm) preferred
Maximum Inter-label gap 0.16 (4 mm)
Ticket/tag notch size (W × L) 0.08" × 0.48 (2 mm × 12 mm)
Tear-Off Mode: Labels produced in strips.
Peel-Off Mode*: Labels dispensed and peeled from the liner.
Cutter Mode*: Labels are printed and individually cut.
Rewind Mode*: Labels are externally rewound (requires optional media rewinder — not
available from Zebra Technologies).