Datasheet
Page 5-16 S400/S600 Maintenance Manual 44895L Rev. 3 3/15/04
6HFWLRQ 0DLQWHQDQFHDQG$VVHPEO\'UDZLQJV
* Available only as HW44216 in quantities of 25.
** Available only as HW44356 in quantities of 25.
*** Available only as HW44172-2 in quantities of 10.
† Available only as HW44100 in quantities of 25.
Table 5-8. Tear/Cutter Drive System
# Part No. Description Qty
1
44023-0M Stepper Motor (Tear-Off and Cutter Option) 1
44023-2M Stepper Motor (Peel-Off Option) 1
2 44216* Screw, M4.2 × 1.41 × 13 1
3 44177 Tear-Plate Ground Strap 1
4 44019 Idler Shaft 1
5 44025
Idler Pulley, 20T (Tear-Off and Cutter
Option only)
1
6 44356**
Washer 0.198 × 0.75 × 0.085
(Tear-Off and Cutter Option)
1
7 44055 Nut, M5 × 0.8 × 2.6 1
8 44172-2*** Ground Chain Assembly 1-1/8" 1
9
45189-5
Main Drive Belt (S400/600 Peel-Off
Option)
1
45189-6
Main Drive Belt (S600 Tear-Off and Cutter
Option)
1
45189-8
Main Drive Belt 160T (S400 Tear-Off and
Cutter Option)
1
10
44017 Platen Pulley (S400) 1
44022 Platen Pulley, 50T (S600) 1
11 44485 Screw, M3 × 8 1
12 44100† Set Screw, M3 × 0.5 × 6 1
Bold=Part available for purchase
Light italic=Part not available for purchase, listed and shown for reference only