Datasheet
44895L Rev. 3 3/15/04 S400/S600 Maintenance Manual Page 4-59
3UHYHQWLYHDQG&RUUHFWLYH0DLQWHQDQFH 6HFWLRQ
Figure 4-50. Power Supply Assembly Removal
1. Remove the screw in the
middle of the media
compartment that
secures the main
base and power
supply base.
2. Remove the ground
wire from the ground
bar.
3. Insert flat-blade
screwdriver
tip into slot.
4. Gently pull the
screwdriver handle
toward the front of the
printer until tab pops out of
cutout (into the base).
5. Carefully pry the front of the
power supply base downward to
remove power supply.
Slot
Tab
Screw
Ground
Wire