Specifications

Administrator Console 4 - 15
Configure Read Points
Click Read points in the selection menu to view the Antenna Status and Configuration window. Use this window to
configure the read point settings and view the current read points state.
Figure 4-16 Configure Read Points
Antenna Status
Displays the status of the reader read points. Click the read point status button to view and/or change the selected
antenna configuration.
• Connected (green button):
Read point is enabled and an antenna is connected to the port.
• Not Connected (red button):
Read point is enabled, no antenna is connected to the port.
• User Disabled (yellow button):
Read point is disabled by the user.
Antenna Configuration
• Choose ReadPoint - Select a readpoint (or all) to display the configuration.
• Description - User-specified read point description. Accepts up to 32 alphanumeric characters.
• User Configuration - Enables or disables a specific read point. Disabling a read point blocks RF operation
using the port/antenna.
• Air Protocol - Displays the list of air protocols the read point supports. Currently only EPC class1 GEN2 air
protocol is supported.
• Set Properties - Click Set Properties to send the changes to the reader.
These settings only affect the display. Use Commit/Revert on page 4-32 to save the changes.