Service manual

Ribbon Take-Up Clutch Replacement 980357-204A
Preparations
Open the cover, then remove media and any ribbon from the printer.
Removal
1. Remove the retaining ring 3 from the
outside shaft of the hub.
2. Remove the take-up clutch assembly 2.
3. Slide the hub 1 out of the carriage side
frame
!.
Assembly
1. Insert the hub 1 through the carriage
side frame
!.
2. Put the ribbon take-up clutch assembly
2 into place.
3. Secure with an exterior retaining ring 3.
980357-001 Rev. A 21
MOVIE