Specifications

AC Power Fuse Replacement
A user-replaceable AC Power Fuse is located just above the Power ON/OFF
Switch on the rear of the printer. For a 115 VAC installation, the replacement
fuse is a 3AG Fast Blow style rated at 5 Amp/250VAC. For a 230 VAC
installation, the fuse is the same style but rated at 3 Amp/250VAC.
CAUTION
Turn the printer’s AC Power Switch OFF and disconnect
the printer’s AC Power Cable before replacing the fuse.
To replace the fuse, insert the tip of a flatblade screwdriver into the slot
designed into the Fuse Holder’s End Cap. Press in slightly on the end cap and
turn the screwdriver slightly counter-clockwise. The end cap disengages from
the Fuse Holder and the fuse may be removed. To install a new fuse, reverse the
sequence.
VOLTAGE
SELECTION SWITCH
AC POWER FUSE
REPLACEMENT
AC POWER
ON/OFF SWITCH
AC POWER
CABLE CONNECTION
Figure 5.21 AC Fuse Replacement
S -Series Maintenance Manual: Volume 1 Corrective Maintenance
38452L Rev. 3 Page 5-33