Specifications

Option Switches
These switches are located above the signal interface cable connector. See
Figure 2.11.
In the following tables, “R” means the switch is in the right position, while “L”
means the switch is in the left position. Refer to Figure 2.12.
SIGNAL INTERFACE
CABLE CONNECTION
BANK 2BANK 2
BANK 1
(ONLY ON
SERIAL UNITS)
105 and 160
PARALLEL
Se S 105 and 160
SERIAL
Se S
Figure 2.11 Option Switch Locations
1 2 3 4 5 6 7 8
(L)(R)
Figure 2.12 Option Switches
Getting Ready to Print S -Series Maintenance Manual: Volume 1
Page 2-12 38452L Rev. 3