Specifications

Controls and Indicators
All of the printer controls and indicators are located on the front of the unit except for the
Power ON/OFF Switch, which is located at the rear of the printer.
Front Panel Controls
AC Power ON/OFF Switch
Controls application of AC Power to
the printer. When powered ON, the
printer will perform a Power ON Self
Test as it begins operation. Turning the
printer ON while holding down certain
front panel keys will cause additional
printer self tests to occur once the
Power ON Self Test is complete. The
AC Power Switch should be turned
OFF prior to connecting or
disconnecting any cables.
PAUSE Key
The PAUSE Key stops and restarts the
printing process. If the printer is idle
(not printing) when the PAUSE Key is
pressed, no printing can take place. If
the PAUSE Key is pressed while
printing is in progress, the printing
stops once the current label is
completed.
Pressing the PAUSE Key a second time
resumes the printing process.
FEED Key
The FEED Key forces the printer to
feed one blank label. If the printer is
idle (not printing) or if the PAUSE
function is active when the FEED Key
is pressed, one blank label feeds from
the printer immediately. If the printer
is printing, one blank label feeds out
after completion of the current batch of
labels. After one blank label is fed out,
pressing the FEED Key again will
provide a second blank label.
CANCEL Key
The CANCEL Key is only recognized
when the PAUSE function is active.
Press the CANCEL Key and the current
label format will be canceled. If no
format is printing, the next one to be
printed will be canceled. If there are no
formats in the printer, the CANCEL
Key is ignored. If the CANCEL Key is
pressed for an extended period of time
(3 seconds), the printer will perform a
“Cancel All Formats” operation.
Figure 2.1 Front Panel Controls
Getting Ready to Print S -Series Maintenance Manual: Volume 1
Page 2-2 38452L Rev. 3