Specifications

Electrical Requirements
• 115 VAC +15%/−20%or230VAC+15%/−15%, 48-62 Hz
• 5Amps@115V,3Amps@230V
• UL 1950 Listed - Certified to CAN/CSA-C22.2 No. 950-M89
• Classified to IEC 950 and Complies with FCC and Canadian DOC class “A” rules
• Carries the CE mark of compliance
Cable Requirements
The AC Power Cord has a three-prong female connector on one end. This
connector must be plugged into the mating connector at the rear of the S-Series
printer.
115 VAC Applications
A Standard US-style, three-prong grounded male plug is attached to the other
end of the AC Power Cord. This connector must be plugged into a nearby
electrical outlet.
230 VAC Applications
An AC Power Cord may or may not be included with the printer. For those
locations that cannot use either of the three power cords listed below, a proper
grounded AC Power Cord must be obtained and installed by the user (See Figure
2.2). The cable must then be plugged into a nearby electrical outlet.
Part Number AC Power Cable Description
44618 Detachable Power Cord (US Standard 3-prong plug - 115 VAC)
44629 Detachable Power Cord (Continental Europe 3-prong plug - 230 VAC)
44637 Detachable Power Cord (British 3-prong plug - 230 VAC)
Environmental Ranges
Temperature
Operating +41°F to +104°F (+5°C to +40°C)
Storage -40°F to +158°F (-40°C to +70°C)
Non-condensing
relative humidity
Operating 20% to 85%
Storage 20% to 85%
The S -Series System S -Series Maintenance Manual: Volume 1
Page 1-6 38452L Rev. 3