User`s manual

Print Head Care The main factors that contribute to reduced
head life are:
•
Touching the print head! Static electricity
can discharge and damage the print head.
The body's oils and acids also damage the
print head.
•
Cleaning - For optimum performance,
clean the print head regularly after every roll
of thermal transfer ribbon or after every roll of
direct thermal labels.
•
Abrasion - Over time, the movement of me
-
dia/ribbon across the print head will wear
through the protective ceramic coating, ex
-
posing and eventually damaging the print el-
ements (dots).
• Use of proper media - Use only approved
Zebra media. Non-approved media may
contain chemicals that can destroy or dra-
matically reduce the print head's life. Ap-
proved thermal transfer ribbons have a
special anti-stick back coating that helps to
dissipate static and provide lubrication.
• Ribbon Width - Ensure that the thermal
transfer ribbon is as wide or wider than the la-
bel media to prevent exposing the elements
to the more abrasive label material.
•
Temperature - Print head density (heat) set
-
ting. Set the density to the lowest possible set
-
ting that prints a good image.
•
Print Speed - Fast print speeds have higher
friction levels on the print head's surface.
•
Regular Print Head Conditioning - Use
our Save-a-Print head cleaning film to re
-
move print head contamination buildup
quickly and easily. (Part No.105950-047)
Operator Maintenance
B-4 980412-001 Rev.A