User`s manual

Using AutoSense AutoSense sets the sensitivity of the

transmissive sensor, measures and stores the

form (label) and gap lengths. For more details

on media sensing see Appendix A, page A-2. To

activate the AutoSense feature:

Step 1 Load labels into the printer. Do not use the peel

mode. Printer power is ON.

Step 2 Press and hold the PAUSE and CANCEL but

tons for one (1) second.

Step 3 Release the CANCEL button only. Wait three

(3) seconds. Release the PAUSE button.

Step 4 The printer will advance 3-4 labels while per-

forming the adjustment. When the adjustment

is complete, a status summary label will be

printed and the printer will be placed in Diag-

nostic Dump mode.

Step 5 Press the FEED button to exit the Dump mode.

Installation & Operation

18 980412-001 Rev.A

PAUSE & CANCEL

FEED

PAUSE

4 MO3257 3.18.01

Serial port : 96,N,8,1

Image buffer size:245K

Fmem:000,0K,019.9K avl

Gmem:000K,0241K avl

I8,0,001 rY

S8 D12 R032,000 ZT UN

q0784 Q1227,034

Option:D

11 12 13

now in DUMP

mem:000K,0241K avl

Sample: DUMP Mode

Printout

3sec.

1sec.

PEEL

BATCH

Power On

Media Loaded

Batch Mode