Service manual

Cleaning the Media Path
Use a brush or vacuum to clean the media path (except the printhead).
If a label jams inside the printer, remove the label and any adhesive residue immediately. Adhesive
may spread throughout the printer's media path if not completely removed. Many adhesives are
permanent and have short "set" times.
Cleaning the printhead
As you use your printer, the printhead may become contaminated resulting in poor print quality.
Whenever new labels are loaded into the printer, the printhead should be cleaned with a cleaning
pen.
Never touch the printhead. Always clean the printhead with a
cleaning pen or a cotton swab moistened with 95% or higher
isopropyl alcohol to gently remove dirt and dust.
980428-001 Rev. A 79
1. Open the printer and the printhead carriage.
2. Gently rub the cleaning pen across the
amber area of the printhead.
Allow the printhead to dry for 1 minute
before loading labels.
Do Not Clean the printhead with sharp
objects! Only used approved cleaning
materials.