Service manual

Printer Configuration Check
Checking the Installation
1. Turn on the printer and run your printer's AutoSense routine to get a dump mode printout.
If you replaced the main PCBA, the firmware may need updating. Verify the version number on the
dump mode printout, download current firmware to the printer. The latest firmware version and the
firmware downloading software for your Zebra printer can be found at Zebra web site at:
http://www.zebra.com
Also, you will need to reload all of your specific soft fonts, forms or graphics that were previously
loaded into the printer before you start any new print jobs at require these items.
980428-150 Rev. 1 Prelim. 67
4” UKQ1837 V4.03
Serial port : 96,N,8,1
Image buffer size:0507K
Fmem:000.5K,060.9K avl
Gmem:024K,0045K avl
E
I8,0,001 rN
S4 D10 R064,000 ZT UN
q1600 Q1209,026
Option:
17 21 25
Date: 02-19-00
Time: 12:44:00
now in DUMP
mem:000K,0045K avl
This action tests the printer's media drive and
printing capabilities.
You can also check the printout for the upgrade
or option you loaded.
Firmware version number
Memory (available bytes)
Real time clock option (if installed)
PAUSE & CANCEL
FEED
FEED
PAUSE
4 MO3257 3.18.01
Serial port : 96,N,8,1
Image buffer size:245K
Fmem:000,0K,019.9K avl
Gmem:000K,0241K avl
E
I8,0,001 rY
S8 D12 R032,000 ZT UN
q0784 Q1227,034
Option:D
11 12 13
now in DUMP
mem:000K,0241K avl
Sample: DUMP Mode
Printout
3 sec.
1 sec.