Service manual

Label Guide Tab
48 980428-126 Rev. 1 Prelim.
S
T
E
P
P
E
R
M
O
T
O
R
Installation
1. Slide the guide tab on the slide.
2. Insert the tab stop pin until it is flush with
the bottom.
3. Pull the guide tab to the outside of the slide
and verify the guide tab can rotate up.
Tools:
Pliers and a scribe
Removal
1. Push the tab stop pin out of the guide tab's
slide on the label guide and sensor
assembly.
2. Rotate the guide tab down and slide the tab
off the slide.
Tab Stop Pin
Guide Tab