Service manual

Control Panel
Preparations
The exterior cover must be removed prior to proceeding. (980428-101)
Note the main cable harness routing and cable tie positions. (980428-109)
Tools:
#1 Philips screw driver
980428-119 Rev. 1 Prelim. 41
JP35
Removal
1. Cut the three (3) tie-wraps securing the
cables to the power supply and the front
panel.
Caution - Do not cut the cables!
2. Disconnect the control panel cable (JP35)
from main PCBA.
Cut Cable Tie
Cut Cable Ties