User`s manual

Appendix B

Using the Media Cutter

Printers with the cutter option have a bezel with

a motorized blade. Printers with cutters can dis-

pense a single form that is automatically cut

from the media roll.

Guidelines Use the cutter to cut through continuous paper

from rolls and liner between labels.

You can switch cutting on and off by using the

OC command. You can set form length and

gap distances by using the Q command. Refer

to the EPL2 programmer’s manual for complete

programming information.

Keep the cutter dry. Never use any solutions or

solvents to clean the blade. If there is a jam, fol

low the steps for Clearing the Cutter.

980350-001 Rev. A