User`s manual

Cleaning Under
the Sensor Bracket
The transmissive (gap) sensor guide bar bracket
can pivot up for easy cleaning.
Step
1
Open the print head carriage.
Step
2
Clean the metal part of the bracket, only. The
sensor is recessed to protect it from labels and
adhesive.
Clean the clear sensor window below the sensor
bracket. Avoid abrasive cleansers. Only use wa
-
ter on a lint free, clean, damp cloth very
lightly
moistened. Let dry. Verify that the window is
clear of streaks and clouding.
Step
3
Swing the sensor bracket down to close. The
slide lock will automatically lock when in posi
-
tion.
Step
4
Close and lock the print carriage.
980350-001 Rev. A 33
Operation
To Open the
Bracket, Slide the
Lock to the Left
Lift Up the Bracket
Transmissive (Gap)
Sensor Bracket
Slide Lock