User`s manual

FOREWORD

This manual provides installation and operation information for the LP 2684 and TLP 2684 print

ers, manufactured by Zebra Technologies Corporation, Camarillo, California.

This document contains information proprietary to Zebra Technologies Corporation. This docu

ment and the information contained within is copyrighted by Zebra Technologies Corporation and

may not be duplicated in full or in part by any person without written approval from Zebra. While

every effort has been made to keep the information contained within current and accurate as of the

date of publication, no guarantee is given or implied that the document is error-free or that it is ac

curate with regard to any specification. Zebra reserves the right to make changes, for the purpose of

product improvement, at any time.

TRADEMARKS

LP 2684 and TLP 2684 are service marks of Zebra Technologies Corporation. Windows and

MS-DOS are registered trademarks of Microsoft Corp. All other marks are trademarks or registered

trademarks of their respective holders.

CE Compliance

European Council Directive Compliance to Standards

89/336/EEC EMC Directive EN55022-B 1995 RF Emissions control

92/31/EE EMC Directive EN50082-1 1992

Immunity to Electromagnetic

Disturbances

73/23/EEC Low Voltage Directive EN60950 IEC950 Product Safety

FCC NOTICE:

This equipment has been tested and found to comply with the limits of a Class A digital device, pur

suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. How

ever, there is no guarantee that interference will not occur in a particular installation. Operation of

this equipment in a residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

INDUSTRY CANADA NOTICE:

This device complies with Industry Canada ICS-003 class A requirements.

Cet equipement est conforme a l’ICS-003 classe A de la norm Industrielle Canadian

980350-001 Rev. A

iii