Service manual

Cleaning the Print Head
When handled during installation, and over time, the print head may become contaminated
resulting in poor print quality. After installing a new print head or after using a roll of media
or ribbon, rub the cleaning pen across the dark area of the print head. Allow the print head
to dry for one minute before loading labels.
Avoid touching the print head whenever possible. To remove dirt or dust,
always gently clean the print head with a cleaning pen or a cotton swab
moistened with 70% isopropyl alcohol.
Lubrication
None of the serviceable parts require additional lubrication.
980358-001 Rev. A 7
MOVIE