User's Manual

71
Configuration
Control Panel Parameters
9/6/07 XiIIIPlus/R110Xi/R170Xi User Guide 13383L-004 Rev. A
Control Panel Parameters
Use the LCD on the control panel to view and adjust printer settings.
How to View or Modify Parameters
While viewing parameters, press NEXT/SAVE to continue to the next parameter, or press
PREVIOUS to return to the previous parameter in the cycle. When a parameter is changed, an
asterisk (*) appears in the upper left corner of the display to indicate that the value is different
from the one currently active in the printer.
Additional Parameters
Additional parameters appear in the following situations:
• When a wired print server is installed in the printer. For more information, see the
appropriate manual: the ZebraNet 10/100 Print Server User and Reference Guide or the
PrintServer II User and Reference Guide.
• When a wireless print server is installed in the printer. For more information, see the
ZebraNet Wireless Print Server and Wireless Plus Print Server User Guide
• When a Radio Frequency Identification (RFID) reader is installed. See the RFID
Programming Guide for more information.
Copies of these manuals are available at http://www.zebra.com/manuals or on the user CD that
came with your printer.
Note • Your label preparation software or the printer driver may override adjustments made
through the control panel. Refer to the software or driver documentation for more
information.