User's Manual

43
Operations
Print Modes
9/6/07 XiIIIPlus/R110Xi/R170Xi User Guide 13383L-004 Rev. A
Print Modes
The printer can print on roll or fanfold media and use different print modes for label removal.
Use a print mode that matches the media being used and the printer options available
(Table 8). For more information on the types of media, see Types of Media on page 35.
Table 8 • Print Modes
Mode When to Use Printer Action
Tear-Off (default setting) Use for most applications.
Can use roll or fanfold
media. See Load Media in
Tear-Off Mode on page 44.
Each label or strip of labels
can be torn off after printing.
Peel-Off Use only if printer has the
Peel-Off or Rewind option.
Usually uses roll media. See
Load Media in Peel-Off
Mode on page 102.
The liner is peeled away
from the label during
printing. When the printed
label is removed, the next
label prints.
Cutter Use only if printer has a
cutter option. Usually uses
roll media. See Load Media
in Cutter Mode on page 109.
The printer automatically
cuts the label after it is
printed.
Rewind Use only if printer has the
Rewind option without a
cutter. Can use roll or
fanfold media. See Load
Media in Rewind Mode (No
Cutter) on page 114.
The media and/or liner are
rewound onto a core as they
are printed.
Rewind with Cutter Option Use only if printer has the
Rewind option and a cutter.
Can use roll or fanfold
media. See Load Media in
Rewind Mode with Cutter
Option on page 121.
The media and/or liner are
rewound onto a core as they
are printed. The labels are
not cut.