User's Manual

Specifications
Media Specifications
206
13383L-004 Rev. A XiIIIPlus/R110Xi/R170Xi User Guide 9/6/07
110XiIIIPlus/R110Xi Black Mark Sensing Only
Ticket/tag sensing hole diameter 0.125 in. (3 mm) 0.125 in. (3 mm) 0.125 in. (3 mm)
Label registration tolerance (vertical) ± 0.06 in. (± 1.5 mm) ± 0.06 in. (± 1.5 mm) ± 0.06 in. (± 1.5 mm)
Label registration tolerance
(horizontal)
± 0.06 in. (± 1.5 mm) ± 0.06 in. (± 1.5 mm) ± 0.06 in. (± 1.5 mm)
Media Specifications
110XiIIIPlus/
R110Xi 200 dpi
110XiIIIPlus/
R110Xi 300 dpi
110XiIIIPlus
600 dpi
* Does not apply to RFID labels.
** This parameter varies for each transponder type.
Media Specifications
110XiIIIPlus/
R110Xi 200 dpi
110XiIIIPlus/
R110Xi 300 dpi
110XiIIIPlus
600 dpi
Mark length (measuring
parallel to label/tag edge)
Minimum 0.12 in. (3 mm) 0.12 in. (3 mm) 0.12 in. (3 mm)
Maximum 0.43 in. (11 mm) 0.43 in. (11 mm) 0.43 in. (11 mm)
Mark width (measuring
to perpendicular
label/tag edge)
Minimum 0.43 in. (11 mm) 0.43 in. (11 mm) 0.43 in. (11 mm)
Maximum Full media width Full media width Full media width
Mark location within 0.040 in.
(1 mm) of the inside
media edge
within 0.040 in.
(1 mm) of the inside
media edge
within 0.040 in.
(1 mm) of the inside
media edge
Mark density in Optical Density Unit
(ODU)
>1.0 >1.0 >1.0